iCarsoft CR V3.0 - Universal Professional Diagnostic Tool 2024 - 3 Optional Manufacturers

Buy with the official UK distributor and receive a genuine product, a two-year warranty, free updates and free expert advice from an iCarsoft tech for life. 

iCarsoft CR V3.0 is a Professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc.With a 4.0” TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

The CR V3.0 can support up to 3 vehicle brands of your choice. You will need to download your chosen software when you receive the tool. The 3 options can be added as and when needed, so you don't need to add all 3 at once.

To ensure the device is compatible with your vehicle, please contact us or check the coverage list under documents. Please note that not all functions are supported on all vehicles.

YOU CAN SELECT ANY THREE OF THE FOLLOWING SERIES

(For example, if you choose for VW, for BENZ and for BMW.

You will get vehicle coverage for VW, for AUDI, for SEAT, for SKODA, for BENZ, for SPRINTER, for MAYBACH, for SMART, for BMW, for Rolls-Royce and for MINI.)

This scanner is capable of the following features and functions, however not every car is supported for every function.
Please refer to the compatibility lists under 'Documents' or contact us if you are unsure.

1. Read and clear trouble codes on most vehicle systems such as the engine, transmission, ABS and airbag etc.
2. Support OBDII/EOBD Ten Modes of Operation
3. Read Live Data
4. Full ECU Diagnosis
5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6. Easy To Use With Silicone Keys
7. Oil Light/Service Reset: Supports service lamp reset.
8. Electronic Parking Brake (EPB) system: maintenance deactivates and reactivates the EPB system for replacement and initialisation.
9. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
10. Electronic Throttle Control system (ETC) relearns the throttle valve control value while clearing or replacing the throttle valve.
11. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead or recalibrates SAS while steering part replacement.
12. The Print Data function allows you to print out diagnostic data recorded by the scan tool or customised test reports.
13. Battery test allows you to get the voltage of battery via the OBD port by the scan tool when the engine starts.
14. Battery Management System (BMS), registers new battery to the BMS for battery replacement.
15. DTC Library to lookup when the user is operating this tool.
16. Upgrade Via PC
17. Multi-language: English, German, Dutch, Spanish, French (more under development)
18. ABS Bleeding: release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
19. Injector Coding: relearn the injector control parameter when the injector is renewed or replaced

 (SERVICE) RESET FUNCTIONS

1. Oil Light/Service Reset: Support service lamp/ service interval reset.
2. EPB (Electronic Parking Brake) system: maintenance deactivates and reactivates the EPB system for replacement and initialization.
3. DPF (Diesel Particulate Filter) Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
4. ETC (Electronic Throttle Control) system relearns the throttle valve control value while clear or replace the throttle valve.
5. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
6. BMS (Battery Management System), registers new battery to the BMS while battery replacement.
7. ABS Bleeding : release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
8. Injectors Coding :relearn the injector control parameter while the injectors renewed or replaced .
9. BCM(Body Stability): This function supports routine maintenance of DSC modules, for example, reset or delete the adaptation values, start-up the unit.
10. ECM(Engine) :This function supports routine maintenance of engine modules, for example, reset or delete the adaptation values, calculate fuel consumption.
11. TCM (Trans adaption):This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
12. TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
13. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
14. ACS (Air Conditioner),this function supports routine maintenance of air condition modules, for example, air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
15. Head Lamp is about the headlamp maintenance, maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
16. Seat calibration, after repairing or replacing the window lift moto, it is necessary to perform relevant functions for calibration.

Please refer to the functions list under 'Documents' for more info.

Not all systems and functions can be accessed on all vehicles, often due to the age of the car.

Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 

Professional OBDII Functions

1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11. Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Colour Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More…..

SPECIFICATIONS

1)    Packaging item box

2)    Nylon Bag

3)    Main Unit

4)    Main OBD2 Cable

5)    Charging USB Cable

6)    User Manual

The CR V3.0 can cover all the same functions as a V3.0 device. For example, if you need to check the compatibility of your Mercedes vehicle, please refer to the documents under MB V3.0, and for a Land Rover, LR V3.0 and so on.

Please visit the links below and select the 'Documents' tab to check if your vehicle is supported:

Audi / Seat / Skoda / Volkswagen

BMW / Mini

Fiat / Alfa Romeo

Ford / Holden / Chrysler / Chevrolet

Kia / Hyundai / Daewoo

Land Rover / Jaguar

Mercedes / Sprinter / Smart

Porsche

Toyota / Nissan / Mitsubishi (+other Japanese makes)

Vauxhall / Opel

Volvo / Saab

The links above show the maximum function level that this model can support. Please refer to the documents on each page or contact us and we will be happy to help.