iCarsoft EU MAX - European Vehicles Professional Diagnostic Tool 2024
- Description
- Features
- Compatibility A-F
- Compatibility G-L
- Compatibility M-R
- Compatibility S-Z
- Specs
- FAQs
- Returns, Support & Warranty
EU MAX – MAX POWERFUL. MAX SYSTEMS. MAX VEHICLE MAKES.
2024 - The latest and most comprehensive version of the iCarsoft V3.0 range with a professional 4.3’’ LCD capacitive touchscreen. DIY scanner for European multi-brand vehicles.
ICARSOFT EU MAX IS A PROFESSIONAL AND POWERFUL VEHICLE FAULT DIAGNOSIS TOOL FOR EUROPEAN VEHICLE MANUFACTURERS DEVELOPED BY ICARSOFT TECHNOLOGY INC.
TOGETHER WITH THE ABILITY TO QUICKLY READ AND CLEAR DTCS FOR ALL AVAILABLE MODULES OF THE MAJORITY OF THE MAKES AND MODELS ON THE MARKET, EU MAX PROVIDES YOU WITH SUPERIOR SPECIAL FUNCTIONS. IT FEATURES FULL ECU DIAGNOSIS OF MOST VEHICLE BRANDS AND TEST MODES MAINLY INCLUDE: CANBUS, ISO9141, KWP2000, AND J1850 ETC. IT ENABLES TECHNICIANS TO ACCURATELY DIAGNOSE COMPLEX PROBLEMS.
The EU MAX can support the following European vehicle manufacturers:
- European Manufacturers: Abarth, Alfa Romeo, Audi, BMW, Citroen, Dacia, DS, Fiat, Ford, Jaguar, Lancia, Land Rover, Maybach, Mercedes, Mini, Opel, Peugeot, Porsche, Renault, Rolls Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volkswagen, and Volvo.
Buy with the UK's official iCarsoft distributor and you will receive both this vehicle diagnostic tool as well as lifetime access to our premium customer service package, which includes:
- Free technical advice and updates
- A warranty lasting up to two full years after purchase
This V3.0 device is capable of performing the following functions, but please note not all functions will be supported on all vehicles. To ensure the device is compatible with your vehicle, please contact us or check the coverage lists under the ‘Compatibility’ tab in this description.
- General diagnostics (reading and clearing fault codes)
- Oil service interval reset
- SAS calibrations
- Electronic parking brake
- Electronic throttle controls
- Battery management system
- ABS bleeding
- DPF regeneration
- Injector coding
- Air conditioning systems
- Air filtrations systems
- Sensor calibrations
- Door, window and roof
- Engine control unit, including adaptations
- Fuel pumps
- Idling (vehicle start / stop systems)
- Headlight adjustments
- Seat settings
- Air suspension
- Transmission control module
- Tyre pressure monitoring system
Please see the CR MAX if you require a version of this scanner for more vehicle manufacturers.
The iCarsoft EU MAX comes packaged with a wide range of useful features for technicians, including:
-
General Diagnostics: Read and erase fault codes, and detect and translate the most common codes and warnings on the vehicle display. This includes the airbags, transmission, and engine, among others. Access to a full DTC library, as well as the ability to clear and read data in real time.
-
Multi-Language Support: English, German, Dutch, Spanish, French, Polish, Italian, Russian, Portuguese, Hungarian, Czech, Swedish, Norwegian, Finnish, Danish.
-
Compatible with a wide range of OBDII/EOBD testing modes (J1850 PWM, CAN, J1850 VPW, KWP2000, ISO9141)
-
I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
-
Freeze Frame - When an emission-related fault occurs, certain vehicle conditions are recorded by the onboard computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
-
O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's onboard computer.
-
On-Board Monitoring -- This function can be utilised to read the results of on-board diagnostic monitoring tests for specific components/systems.
-
Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
-
Actuation Test / Bidirectory Test is used to access vehicle-specific subsystem and component tests
-
Improved live data reading, complete with colourization, live updates, and speedy refreshes
-
Printing: After retrieving important data via customised testing or scanning, you can then print it out for your records.
-
Accessible Interface: Highly readable screen and large silicone keys
Compatibility for vehicle manufacturers A-F
This V3.0 scanner is capable of performing the following functions, but please note not all functions will be supported on all vehicles. Please check compatibility of your vehicle by clicking the links under each heading below. If your car is not there, it will not be supported.
-
General Diagnostics
Reading and clearing fault codes (DTCs), and viewing live data.
Abarth V3.0 Diagnostics Compatibility List
Alfa Romeo V3.0 Diagnostics Compatibility List
Audi V3.0 Diagnostics Compatibility List
BMW V3.0 Diagnostics Compatibility List
Citroen V3.0 Diagnostics Compatibility List
Dacia V3.0 Diagnostics Compatibility List
DS V3.0 Diagnostics Compatibility List
Fiat V3.0 Diagnostics Compatibility List
Ford V3.0 Diagnostics Compatibility List
-
Oil Service Reset Interval
Reset the warning light that says an oil change or service is due. The scanner will do this on one-click in some cars, but for others a step-by-step process is required which the scanner will guide you through.
Abarth V3.0 Oil Function
Alfa Romeo V3.0 Oil Function
Audi V3.0 Oil Function
BMW V3.0 Oil Function
Citroen V3.0 Oil Function
Dacia V3.0 Oil Function
DS V3.0 Oil Function
Fiat V3.0 Oil Function
Ford V3.0 Oil Function
-
SAS Calibrations
This function allows you to reset or calibrate new Steering Angle Sensors after they have been changed.
Abarth V3.0 SAS Function
Alfa Romeo V3.0 SAS Function
Audi V3.0 SAS Function
BMW V3.0 SAS Function
Citroen V3.0 SAS Function
Dacia V3.0 SAS Function
DS V3.0 SAS Function
Fiat V3.0 SAS Function
Ford V3.0 SAS Function
-
EPB
The Electronic Parking Brake function allows you to manually wind back the rear brake pads into the service position, allowing you to change and recalibrate them.
Audi V3.0 EPB Function
BMW V3.0 EPB Function
Citroen V3.0 EPB Function
DS V3.0 EPB Function
Fiat V3.0 EPB Function
Ford V3.0 EPB Function
-
ETCs
The Electronic Throttle Control function allows you to perform an adaptation after cleaning or replacing the Electronic Throttle Body. This function is also used when the ECU is replaced, or a negative battery terminal has been disconnected.
Abarth V3.0 ETC Function
Alfa Romeo V3.0 ETC Function
Audi V3.0 ETC Function
BMW V3.0 ETC Function
Citroen V3.0 ETC Function
Dacia V3.0 ETC Function
DS V3.0 ETC Function
Fiat V3.0 ETC Function
Ford V3.0 ETC Function
- BMS
Access the Battery Management System of the vehicle in order to register a new battery and reset parameters after the battery has been changed.
Alfa Romeo V3.0 BMS Function
Audi V3.0 BMS Function
BMW V3.0 BMS Function
Citroen V3.0 BMS Function
Dacia V3.0 BMS Function
DS V3.0 BMS Function
Fiat V3.0 BMS Function
Ford V3.0 BMS Function -
ABS Bleeding
This function will allow you to bleed the brakes and remove air in the ABS module (Anti-lock braking system).
Alfa Romeo V3.0 ABS Bleeding Function
BMW V3.0 ABS Bleeding Function
Citroen V3.0 ABS Bleeding Function
Dacia V3.0 ABS Bleeding Function
DS V3.0 ABS Bleeding Function
Fiat V3.0 ABS Bleeding Function
Ford V3.0 ABS Bleeding Function
-
DPF Regen
Force a Diesel Particulate Filter Regeneration on the vehicle when the car cannot burn off the excess soot on its own. View live data including the DPF Fill Soot Levels. A full list of the parameters that must be met before performing this function can be viewed here.
Alfa Romeo V3.0 DPF Function
Audi V3.0 DPF Function
BMW V3.0 DPF Function
Citroen V3.0 DPF Function
Dacia V3.0 DPF Function
DS V3.0 DPF Function
Fiat V3.0 DPF Function
Ford V3.0 DPF Function
-
Injector Coding
Code new injectors to the vehicle after replacement in order to ensure the car is burning off the correct amount of fuel, and carry out an Injector Valve Test. Please note: even if this function is supported, compatibility is only guaranteed if the injectors are replaced with the same type.
Alfa Romeo V3.0 Injector Function
Audi V3.0 Injector Function
BMW V3.0 Injector Function
Citroen V3.0 Injector Function
Dacia V3.0 Injector Function
DS V3.0 Injector Function
Fiat V3.0 Injector Function
Ford V3.0 Injector Function
-
Air Conditioning Systems
This function allows you to carry out tests on the AC system, and reset the compressor. It includes adaptations and resets of the system.
Abarth V3.0 ACS Function
Alfa Romeo V3.0 ACS Function
Fiat V3.0 ACS Function
-
Sensor Calibrations
Reset various different sensors within the vehicle. Please refer to the bottom of the compatibility list to view the exact options available.
BMW V3.0 Sensor Calibration Function
Ford V3.0 Sensor Calibration Function
-
Door, Windows, and Roof
Use this function to calibrate and initialise the door and the roof windows.
Ford V3.0 Door/Window/Roof Function
-
ECU - Engine Control Unit
The ECU function helps to reset and replace various parts of the vehicle within the Engine Control Unit, and also includes some adaptations. Please refer to the bottom of the compatibility list to view the exact options available.
BMW V3.0 ECU Function
Ford V3.0 ECU Function
-
Idling
This function deals with the vehicle’s start/stop systems. Use it to run an Idle Speed Test and make adjustments.
BMW V3.0 Idling Function
-
Headlight Adjustments
Calibrate the headlights and the axle sensor.
Abarth V3.0 Headlights Function
Alfa Romeo V3.0 Headlights Function
Audi V3.0 Headlights Function
Fiat V3.0 Headlights Function
Ford V3.0 Headlights Function
-
Seat Settings
Reset and calibrate the seats in the car. Includes heated seat settings (climate controlled), massage, seat entry and exit, and replacements.
Ford V3.0 Seats Function
-
SPS - Air Suspension
This function allows you to calibrate and reset parameters, inflate, deflate and enable the Air Suspension system. Access the Ride Level Control, perform height calibrations, and set tolerances.
Alfa Romeo V3.0 SPS Function
Audi V3.0 SPS Function
Ford V3.0 SPS Function
-
TCM - Transmission Control Module
This function allows you to recalibrate and replace sensors within the TCM, also known as the Gearbox Control Unit. Please refer to the bottom of the compatibility list to view the exact options available.
BMW V3.0 TCM Function
-
TPMS - Tyre Pressure Management System
Use this function to calibrate and reset the tyre pressure monitoring system, and replace tyre pressure sensors.
Abarth V3.0 TPMS Function
Alfa Romeo V3.0 TPMS Function
BMW V3.0 TPMS Function
Fiat V3.0 TPMS Function
Ford V3.0 TPMS Function
- Other Functions
Additional functions supported by this V3.0 scanner. Please refer to the bottom of the list for included functions.
BMW V3.0 Other Functions
We would be happy to check compatibility for you if you are unsure. Please contact us with the full vehicle details including the model, manufacture year and chassis type, or provide the VIN.
Compatibility for vehicle manufacturers G-L
This V3.0 scanner is capable of performing the following functions, but please note not all functions will be supported on all vehicles. Please check compatibility of your vehicle by clicking the links under each heading below. If your car is not there, it will not be supported.
-
General Diagnostics
Reading and clearing fault codes (DTCs), and viewing live data.
Jaguar V3.0 Diagnostics Compatibility List
Lancia V3.0 Diagnostics Compatibility List
Land Rover V3.0 Diagnostics Compatibility List
-
Oil Service Reset Interval
Reset the warning light that says an oil change or service is due. The scanner will do this on one-click in some cars, but for others a step-by-step process is required which the scanner will guide you through.
Jaguar V3.0 Oil Function
Lancia V3.0 Oil Function
Land Rover V3.0 Oil Function
-
SAS Calibrations
This function allows you to reset or calibrate new Steering Angle Sensors after they have been changed.
Jaguar V3.0 SAS Function
Lancia V3.0 SAS Function
Land Rover V3.0 SAS Function
-
EPB
The Electronic Parking Brake function allows you to manually wind back the rear brake pads into the service position, allowing you to change and recalibrate them.
Jaguar V3.0 EPB Function
Land Rover V3.0 EPB Function
-
ETCs
The Electronic Throttle Control function allows you to perform an adaptation after cleaning or replacing the Electronic Throttle Body. This function is also used when the ECU is replaced, or a negative battery terminal has been disconnected.
Jaguar V3.0 ETC Function
Lancia V3.0 ETC Function
Land Rover V3.0 ETC Function
- BMS
Access the Battery Management System of the vehicle in order to register a new battery and reset parameters after the battery has been changed.
Jaguar V3.0 BMS Function
Land Rover V3.0 BMS Function -
ABS Bleeding
This function will allow you to bleed the brakes and remove air in the ABS module (Anti-lock braking system).
Jaguar V3.0 ABS Bleeding Function
Lancia V3.0 ABS Bleeding Function
Land Rover V3.0 ABS Bleeding Function
-
DPF Regen
Force a Diesel Particulate Filter Regeneration on the vehicle when the car cannot burn off the excess soot on its own. View live data including the DPF Fill Soot Levels. A full list of the parameters that must be met before performing this function can be viewed here.
Jaguar V3.0 DPF Function
Lancia V3.0 DPF Function
Land Rover V3.0 DPF Function
-
Injector Coding
Code new injectors to the vehicle after replacement in order to ensure the car is burning off the correct amount of fuel, and carry out an Injector Valve Test. Please note: even if this function is supported, compatibility is only guaranteed if the injectors are replaced with the same type.
Jaguar V3.0 Injector Function
Lancia V3.0 Injector Function
Land Rover V3.0 Injector Function
-
Air Conditioning Systems
This function allows you to carry out tests on the AC system, and reset the compressor. It includes adaptations and resets of the system.
Jaguar V3.0 ACS Function
Lancia V3.0 ACS Function
Land Rover V3.0 ACS Function
-
Sensor Calibrations
Reset various different sensors within the vehicle. Please refer to the bottom of the compatibility list to view the exact options available.
Jaguar V3.0 Sensor Calibration Function
Land Rover V3.0 Sensor Calibration Function
-
Door, Windows, and Roof
Use this function to calibrate and initialise the door and the roof windows.
Jaguar V3.0 Door/Window/Roof Function
Land Rover V3.0 Door/Window/Roof Function
-
ECU - Engine Control Unit
The ECU function helps to reset and replace various parts of the vehicle within the Engine Control Unit, and also includes some adaptations. Please refer to the bottom of the compatibility list to view the exact options available.
Jaguar V3.0 ECU Function
Land Rover V3.0 ECU Function
-
Idling
This function deals with the vehicle’s start/stop systems. Use it to run an Idle Speed Test and make adjustments.
Jaguar V3.0 Idling Function
Land Rover V3.0 Idling Function
-
Headlight Adjustments
Calibrate the headlights and the axle sensor.
Jaguar V3.0 Headlight Function
Lancia V3.0 Headlight Function
Land Rover V3.0 Headlight Function
-
Seat Settings
Reset and calibrate the seats in the car. Includes heated seat settings (climate controlled), massage, seat entry and exit, and replacements.
Jaguar V3.0 Seats Function
Land Rover V3.0 Seats Function
-
SPS - Air Suspension
This function allows you to calibrate and reset parameters, inflate, deflate and enable the Air Suspension system. Access the Ride Level Control, perform height calibrations, and set tolerances.
Jaguar V3.0 SPS Function
Land Rover V3.0 SPS Function
-
TCM - Transmission Control Module
This function allows you to recalibrate and replace sensors within the TCM, also known as the Gearbox Control Unit. Please refer to the bottom of the compatibility list to view the exact options available.
Jaguar V3.0 TCM Function
Land Rover V3.0 TCM Function
-
TPMS - Tyre Pressure Management System
Use this function to calibrate and reset the tyre pressure monitoring system, and replace tyre pressure sensors.
Jaguar V3.0 TPMS Function
Lancia V3.0 TPMS Function
Land Rover V3.0 TPMS Function
- Other Functions
Additional functions supported by this V3.0 scanner. Please refer to the bottom of the list for included functions.
Jaguar V3.0 Other Functions
Land Rover V3.0 Other Functions
We would be happy to check compatibility for you if you are unsure. Please contact us with the full vehicle details including the model, manufacture year and chassis type, or provide the VIN.
Compatibility for vehicle manufacturers M-R
This V3.0 scanner is capable of performing the following functions, but please note not all functions will be supported on all vehicles. Please check compatibility of your vehicle by clicking the links under each heading below. If your car is not there, it will not be supported.
-
General Diagnostics
Reading and clearing fault codes (DTCs), and viewing live data.
Maybach V3.0 Diagnostics Compatibility List
Mercedes V3.0 Diagnostics Compatibility List
Mini V3.0 Diagnostics Compatibility List
Opel V3.0 Diagnostics Compatibility List
Peugeot V3.0 Diagnostics Compatibility List
Porsche V3.0 Diagnostics Compatibility List
Renault V3.0 Diagnostics Compatibility List
Rolls Royce V3.0 Diagnostics Compatibility List
-
Oil Service Reset Interval
Reset the warning light that says an oil change or service is due. The scanner will do this on one-click in some cars, but for others a step-by-step process is required which the scanner will guide you through.
Maybach V3.0 Oil Function
Mercedes V3.0 Oil Function
Mini V3.0 Oil Function
Opel V3.0 Oil Function
Peugeot V3.0 Oil Function
Porsche V3.0 Oil Function
Renault V3.0 Oil Function
Rolls Royce V3.0 Oil Function
-
SAS Calibrations
This function allows you to reset or calibrate new Steering Angle Sensors after they have been changed.
Maybach V3.0 SAS Function
Mercedes V3.0 SAS Function
Mini V3.0 SAS Function
Opel V3.0 SAS Function
Peugeot V3.0 SAS Function
Porsche V3.0 SAS Function
Renault V3.0 SAS Function
Rolls Royce V3.0 SAS Function
-
EPB
The Electronic Parking Brake function allows you to manually wind back the rear brake pads into the service position, allowing you to change and recalibrate them.
Mercedes V3.0 EPB Function
Mini V3.0 EPB Function
Opel V3.0 EPB Function
Peugeot V3.0 EPB Function
Porsche V3.0 EPB Function
Renault V3.0 EPB Function
Rolls Royce V3.0 EPB Function
-
ETCs
The Electronic Throttle Control function allows you to perform an adaptation after cleaning or replacing the Electronic Throttle Body. This function is also used when the ECU is replaced, or a negative battery terminal has been disconnected.
Maybach V3.0 ETC Function
Mercedes V3.0 ETC Function
Mini V3.0 ETC Function
Opel V3.0 ETC Function
Peugeot V3.0 ETC Function
Porsche V3.0 ETC Function
Renault V3.0 ETC Function
Rolls Royce V3.0 ETC Function
- BMS
Access the Battery Management System of the vehicle in order to register a new battery and reset parameters after the battery has been changed.
Mini V3.0 BMS Function
Opel V3.0 BMS Function
Peugeot V3.0 BMS Function
Porsche V3.0 BMS Function
Renault V3.0 BMS Function
Rolls Royce V3.0 BMS Function -
ABS Bleeding
This function will allow you to bleed the brakes and remove air in the ABS module (Anti-lock braking system).
Maybach V3.0 ABS Bleeding Function
Mercedes V3.0 ABS Bleeding Function
Mini V3.0 ABS Bleeding Function
Opel V3.0 ABS Bleeding Function
Peugeot V3.0 ABS Bleeding Function
Porsche V3.0 ABS Bleeding Function
Renault V3.0 ABS Bleeding Function
Rolls Royce V3.0 ABS Bleeding Function
-
DPF Regen
Force a Diesel Particulate Filter Regeneration on the vehicle when the car cannot burn off the excess soot on its own. View live data including the DPF Fill Soot Levels. A full list of the parameters that must be met before performing this function can be viewed here.
Mercedes V3.0 DPF Function
Mitsubishi V3.0 DPF Function
Mini V3.0 DPF Function
Opel V3.0 DPF Function
Peugeot V3.0 DPF Function
Porsche V3.0 DPF Function
Renault V3.0 DPF Function
Rolls Royce V3.0 DPF Function
-
Injector Coding
Code new injectors to the vehicle after replacement in order to ensure the car is burning off the correct amount of fuel, and carry out an Injector Valve Test. Please note: even if this function is supported, compatibility is only guaranteed if the injectors are replaced with the same type.
Mercedes V3.0 Injector Function
Mini V3.0 Injector Function
Opel V3.0 Injector Function
Peugeot V3.0 Injector Function
Porsche V3.0 Injector Function
Renault V3.0 Injector Function
Rolls Royce V3.0 Injector Function
-
Air Conditioning Systems
This function allows you to carry out tests on the AC system, and reset the compressor. It includes adaptations and resets of the system.
Maybach V3.0 ACS Function
Mercedes V3.0 ACS Function
-
AFS - Air Filtration Systems
This function allows you to reset the air filter values after a replacement.
Maybach V3.0 AFS Function
Mercedes V3.0 AFS Function
-
Sensor Calibrations
Reset various different sensors within the vehicle. Please refer to the bottom of the compatibility list to view the exact options available.
Maybach V3.0 Sensor Calibration Function
Mercedes V3.0 Sensor Calibration Function
Mini V3.0 Sensor Calibration Function
Rolls Royce V3.0 Sensor Calibration Function
-
Door, Windows, and Roof
Use this function to calibrate and initialise the door and the roof windows.
Opel V3.0 Door/Window/Roof Function
-
ECU - Engine Control Unit
The ECU function helps to reset and replace various parts of the vehicle within the Engine Control Unit, and also includes some adaptations. Please refer to the bottom of the compatibility list to view the exact options available.
Maybach V3.0 ECU Function
Mercedes V3.0 ECU Function
Mini V3.0 ECU Function
Rolls Royce V3.0 ECU Function
- Fuel Pumps
Activate and bleed the fuel pump using this function. Please refer to the bottom of the compatibility list to view the exact options available.
Maybach V3.0 Fuel Pump Function
Mercedes V3.0 Fuel Pump Function
Opel V3.0 Fuel Pump Function -
Idling
This function deals with the vehicle’s start/stop systems. Use it to run an Idle Speed Test and make adjustments.
Maybach V3.0 Idling Function
Mercedes V3.0 Idling Function
Mini V3.0 Idling Function
Opel V3.0 Idling Function
Rolls Royce V3.0 Idling Function
-
Headlight Adjustments
Calibrate the headlights and the axle sensor.
Opel V3.0 Headlight Function
-
SPS - Air Suspension
This function allows you to calibrate and reset parameters, inflate, deflate and enable the Air Suspension system. Access the Ride Level Control, perform height calibrations, and set tolerances.
Maybach V3.0 SPS Function
Mercedes V3.0 SPS Function
Porsche V3.0 SPS Function
-
TCM - Transmission Control Module
This function allows you to recalibrate and replace sensors within the TCM, also known as the Gearbox Control Unit. Please refer to the bottom of the compatibility list to view the exact options available.
Maybach V3.0 TCM Function
Mercedes V3.0 TCM Function
Mini V3.0 TCM Function
Rolls Royce V3.0 TCM Function
-
TPMS - Tyre Pressure Management System
Use this function to calibrate and reset the tyre pressure monitoring system, and replace tyre pressure sensors.
Maybach V3.0 TPMS Function
Mercedes V3.0 TPMS Function
Mini V3.0 TPMS Function
Porsche V3.0 TPMS Function
Renault V3.0 TPMS Function
Rolls Royce V3.0 TPMS Function
- Other Functions
Additional functions supported by this V3.0 scanner. Please refer to the bottom of the list for included functions.
Mini V3.0 Other Functions
Opel V3.0 Other Functions
Porsche V3.0 Other Functions
Rolls Royce V3.0 Other Functions
We would be happy to check compatibility for you if you are unsure. Please contact us with the full vehicle details including the model, manufacture year and chassis type, or provide the VIN.
Compatibility for vehicle manufacturers S-Z
This V3.0 scanner is capable of performing the following functions, but please note not all functions will be supported on all vehicles. Please check compatibility of your vehicle by clicking the links under each heading below. If your car is not there, it will not be supported.
-
General Diagnostics
Reading and clearing fault codes (DTCs), and viewing live data.
Saab V3.0 Diagnostics Compatibility List
Seat V3.0 Diagnostics Compatibility List
Skoda V3.0 Diagnostics Compatibility List
Smart V3.0 Diagnostics Compatibility List
Sprinter V3.0 Diagnostics Compatibility List
Vauxhall V3.0 Diagnostics Compatibility List
Volvo V3.0 Diagnostics Compatibility List
VW V3.0 Diagnostics Compatibility List
-
Oil Service Reset Interval
Reset the warning light that says an oil change or service is due. The scanner will do this on one-click in some cars, but for others a step-by-step process is required which the scanner will guide you through.
Saab V3.0 Oil Function
Seat V3.0 Oil Function
Skoda V3.0 Oil Function
Smart V3.0 Oil Function
Sprinter V3.0 Oil Function
Vauxhall V3.0 Oil Function
Volvo V3.0 Oil Function
VW V3.0 Oil Function
-
SAS Calibrations
This function allows you to reset or calibrate new Steering Angle Sensors after they have been changed.
Saab V3.0 SAS Function
Seat V3.0 SAS Function
Skoda V3.0 SAS Function
Smart V3.0 SAS Function
Sprinter V3.0 SAS Function
Vauxhall V3.0 SAS Function
Volvo V3.0 SAS Function
VW V3.0 SAS Function
-
EPB
The Electronic Parking Brake function allows you to manually wind back the rear brake pads into the service position, allowing you to change and recalibrate them.
Saab V3.0 EPB Function
Seat V3.0 EPB Function
Skoda V3.0 EPB Function
Sprinter V3.0 EPB Function
Vauxhall V3.0 EPB Function
Volvo V3.0 EPB Function
VW V3.0 EPB Function
-
ETCs
The Electronic Throttle Control function allows you to perform an adaptation after cleaning or replacing the Electronic Throttle Body. This function is also used when the ECU is replaced, or a negative battery terminal has been disconnected.
Saab V3.0 ETC Function
Seat V3.0 ETC Function
Skoda V3.0 ETC Function
Smart V3.0 ETC Function
Sprinter V3.0 ETC Function
Vauxhall V3.0 ETC Function
Volvo V3.0 ETC Function
VW V3.0 ETC Function
- BMS
Access the Battery Management System of the vehicle in order to register a new battery and reset parameters after the battery has been changed.
Seat V3.0 BMS Function
Skoda V3.0 BMS Function
Vauxhall V3.0 BMS Function
Volvo V3.0 BMS Function
VW V3.0 BMS Function -
ABS Bleeding
This function will allow you to bleed the brakes and remove air in the ABS module (Anti-lock braking system).
Smart V3.0 ABS Bleeding Function
Vauxhall V3.0 ABS Bleeding Function
Volvo V3.0 ABS Bleeding Function
-
DPF Regen
Force a Diesel Particulate Filter Regeneration on the vehicle when the car cannot burn off the excess soot on its own. View live data including the DPF Fill Soot Levels. A full list of the parameters that must be met before performing this function can be viewed here.
Saab V3.0 DPF Function
Seat V3.0 DPF Function
Skoda V3.0 DPF Function
Smart V3.0 DPF Function
Sprinter V3.0 DPF Function
Vauxhall V3.0 DPF Function
Volvo V3.0 DPF Function
VW V3.0 DPF Function
-
Injector Coding
Code new injectors to the vehicle after replacement in order to ensure the car is burning off the correct amount of fuel, and carry out an Injector Valve Test. Please note: even if this function is supported, compatibility is only guaranteed if the injectors are replaced with the same type.
Saab V3.0 Injector Function
Seat V3.0 Injector Function
Skoda V3.0 Injector Function
Smart V3.0 Injector Function
Sprinter V3.0 Injector Function
Vauxhall V3.0 Injector Function
Volvo V3.0 Injector Function
VW V3.0 Injector Function
-
Door, Windows, and Roof
Use this function to calibrate and initialise the door and the roof windows.
Vauxhall V3.0 Door/Window/Roof Function
Volvo V3.0 Door/Window/Roof Function
-
ECU - Engine Control Unit
The ECU function helps to reset and replace various parts of the vehicle within the Engine Control Unit, and also includes some adaptations. Please refer to the bottom of the compatibility list to view the exact options available.
Sprinter V3.0 ECU Function
Volvo V3.0 ECU Function
- Fuel Pumps
Activate and bleed the fuel pump using this function. Please refer to the bottom of the compatibility list to view the exact options available.
Saab V3.0 Fuel Pump Function
Vauxhall V3.0 Fuel Pump Function -
Idling
This function deals with the vehicle’s start/stop systems. Use it to run an Idle Speed Test and make adjustments.
Saab V3.0 Idling Function
Vauxhall V3.0 Idling Function
-
Headlight Adjustments
Calibrate the headlights and the axle sensor.
Saab V3.0 Headlight Function
Seat V3.0 Headlight Function
Skoda V3.0 Headlight Function
Vauxhall V3.0 Headlight Function
Volvo V3.0 Headlight Function
VW V3.0 Headlight Function
-
SPS - Air Suspension
This function allows you to calibrate and reset parameters, inflate, deflate and enable the Air Suspension system. Access the Ride Level Control, perform height calibrations, and set tolerances.
Seat V3.0 SPS Function
Skoda V3.0 SPS Function
Volvo V3.0 SPS Function
VW V3.0 SPS Function
-
TPMS - Tyre Pressure Management System
Use this function to calibrate and reset the tyre pressure monitoring system, and replace tyre pressure sensors.
Saab V3.0 TPMS Function
Smart V3.0 TPMS Function
Sprinter V3.0 TPMS Function
Vauxhall V3.0 TPMS Function
Volvo V3.0 TPMS Function
- Other Functions
Additional functions supported by this V3.0 scanner. Please refer to the bottom of the list for included functions.
Vauxhall V3.0 Other Functions
Volvo V3.0 Other Functions
We would be happy to check compatibility for you if you are unsure. Please contact us with the full vehicle details including the model, manufacture year and chassis type, or provide the VIN.
SPECIFICATIONS
Dimensions(W*H*D): 205mm*1 13mm*31mm
Operating System: Android 8.10
Processor: 4Nuclear 1.3GHz
Display: 4.3" TFT LCD, 800*480 Pixels
In addition to the actual unit, the iCarsoft EU MAX also ships with a user manual, quick guide book, and storage bag. Cables include: 1x main OBD2 cable, and 1x USB connecting cable.
Updating the Scanner
This scanner can be updated on the scanner itself. It can also be done via laptop or desktop computer:
-
PC Users - please click here to download and update the software for this scanner from the iCarsoft website.
- MAC Users - please click here to download and update the software for this scanner from the App Store.
Updates are free for life, so the price you pay when purchasing the scanner is the only cost you will ever need to pay.
Before updating, please remove all current software from the scanner to ensure there is enough space for the download. Plug the scanner into the computer and locate its file, then delete all contents the same way you would delete files on a USB stick.
My Vehicle Isn’t Supported?
All of our compatibility lists are fully up to date, so if your vehicle isn’t supported it is likely for one of the following reasons:
- Older models - some older vehicles will not support these scanners as the software does not exist for vehicles of this age.
- Newer models - it takes iCarsoft around 2-3 years to develop software after vehicle releases. For example, the software for 2024 vehicles is likely to be released in 2026/2027.
- Electric vehicles - iCarsoft scanners do not currently support electric vehicles.
- The manufacturer has blocked the function - some software is not able to be created as the car manufacturer has implemented a factory access code which the scanner cannot bypass.
Automatic VIN Recognition
Whilst iCarsoft scanners are able to automatically recognise the majority of VINs, some VINs are atypical and will not follow the standard format. Therefore, we cannot guarantee that automatic VIN recognition will work on every single car. If it isn’t recognised automatically, the VIN can be entered manually.
How Do I Print Data?
Please click here to Download the User Guide to print data.
OBD2 Connection
OBD2 is the standard connection type that allows the scanner to communicate with the vehicle.
Some older cars might not have this connection type, so please check before purchase. For Mercedes, we offer a 38 PIN connector here.
Vehicles imported from Japan will have a different connection type which none of our scanners support. Please ensure the car is not an import and has a standard 17-digit VIN before purchase.
Returns
Due to an increased number of customers not checking compatibility before purchase, we can now only offer to cover the cost of return postage in exceptional circumstances - such as if the error regarding compatibility is our own, or the scanner itself is faulty (please see ‘Warranty’ below).
Please note that whilst our scanners are capable of performing many functions, this doesn’t mean that every single function is definitely supported on your vehicle. Please check the provided compatibility lists or contact us directly to confirm compatibility.
Upon contacting us about a return, please provide your vehicle details and the function you are trying to access, and we will check compatibility for you.
If you order a scanner that is not supported with your vehicle you are of course welcome to return for a refund within 30 days of receipt, however we kindly ask that you pay to return this yourself. We can recommend the Royal Mail Second Class Signed For service as the best value option for UK customers.
If your vehicle should be supported but the scanner is not working as it should, we can also offer technical support (see below).
Technical Support
Most problems can be fixed by updating the scanner, so please try this first. Please ensure all fault codes have been cleared in order to perform the service functions.
We have a dedicated iCarsoft technician that we can contact on your behalf if you do experience an issue that we cannot resolve ourselves. Please contact us with any problems and we will do our best to get your scanner up and running as soon as possible.
In the unlikely event that we cannot get the scanner working for you, we will cover the cost of postage for your return, and refund the order in full.
Warranty
Every iCarsoft scanner comes with a 2 year warranty as standard. This includes electronic faults and problems with the use of the unit, but does not cover accidental damage, e.g. a cracked screen.
Your warranty covers you for replacement of the same scanner model only. After the initial 30 days returns period has passed, the warranty entitles you to the replacement only, and not a refund. A refund will only be offered within the initial 30 day returns period, or if the scanner is unable to be replaced for any reason (e.g. out of stock).