|
The iCarsoft CR Elite is the New Updated version of CR Plus:
The CR Plus supports only 3 special functions and the New CR Elite supports 8 special functions and more are under development.
iCarsoft CR Elite is a professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (more than 40 kinds of vehicle makes) developed by iCarsoft Technology Inc. With a 4.0” TFT LCD and unique diagnostic software, it features full ECU diagnosis of most vehicle brands and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.
CR Elite vehicle coverage:
Nissan,Infiniti,Toyota,Lexus,Scion,Honda,Isuzu,Hyundai,Kia,Daewoo,Mazda,US, Ford,Sprinter,BMW,Mini,VW,Seat,Skoda,Volvo,Porsche,SAAB,EU Ford,Holden,AUS Ford,Acura,Subaru,Mitsubishi,Dacia,Renault,Fiat,GM,Chrysler,Mercedes-Benz,Citroen,Jaguar,Peugeot,Audi,Opel,Land Rover,Smart,Vauxhall,Alfa-Romeo.
Please Note:
Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
This scan tool covers over 20 years of models, so some functions may not be available on all years/models.
For BMW between year 1997-2000, you need to purchase iCarsoft BMW-20 socket for conversion
The CR Elite can work on engine system for chassis 202, 210, 140, 208, 170, 129; but you would need to purchase iCarsoft 38 pin adapter for engine for conversion.
The CR Elite can also work on multi-system for chassis 202, 210, 140, 208, 170, 129; but you would need to purchase iCarsoft 38 pin adapter for multi-system for conversion.
To ensure the device is compatible with your vehicle, please contact us or check the coverage list under documents.
Product Features:
1. iCarsoft CR Elite can do it all-reads and clears trouble codes on four systems such as engine, transmission, ABS and airbag.
2. Applies to the single Brand of most of the models which equipped with OBDII-16 DLC
3. Support OBDII/EOBD Ten Modes of Operation
4. Four System Diagnosis
5. Read &Clear DTC
6. Read Live Data
7. Support special functions: Oil Service Reset, EPB Reset, DPF reset, SAS Reset, ETCs reset, BMS Reset, ABS Bleeding and Injector Coding
8. Support Data Review
9. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
10. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
11. DTC Library to lookup when user is operating this tool.
12. Easy To Use With Silicone Keys
13. Full Speed Upgrade Via PC
14. 4.0″TFT LCD, 480*320 Pixels
15. Multi-language: English, German, Dutch, Spanish, French.
Special functions:
*** Varies across year and model ***
Oil Service Reset Function:
The CR Elite allow you to reset OilService in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.
EPB Reset Function:
This electric parking brake (EPB) function has a multitude of uses to maintain the electronic braking systemssafelyandeffectively.
The applications include deactivating/activating the brake control system, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or pad replacement and also reading and clearing EPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU.
DPF Regeneration or Replacement:
Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot.
SAS Reset Function:
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated. The iCarsoft CR Elite will allow you to carry out steering angle re-calibration on supported models.
ETCs Reset Function:
Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve.
BMS Reset Function:
Battery Management System (BMS), registers new battery to the BMS while battery replacement.
ABS Bleeding:
ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
Injector Coding:
Injector coding, relearn the injector control parameter while the injector renewed or replaced.
SPECIFICATIONS:
Display: 4.0″TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V(Typical)
Power Consumption: 1.8W(Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
Contents:
● Main Unit
● Hard copy User's Manual
● Main cable
● Data cable
● TF Card (Within the main unit)
● Nylon carry case
* 1 Year UK Warranty
* iCarsoft Software Updates Via iCarsoft Website
* iCarsoft Support via iCarsoft Website
Please note: The diagnostic scanner is only compatible with OBDII compliant vehicles.
|
